0Pidettiin

190mm 3CH LED Light Switch System W/ Flashing Light Function Turn ON / OFF for RC Car Model Parts

4.5532

$10.99 / $13.41

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$3.10 / $13.41

Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

location

Osta Nyt Lisää Ostoskoriin

Luottokortti tai Pankkikortti

Taattu Turvallinen Kassa

Ilmainen Lahja

Ilmainen lahja jokaisesta ostoksesta

Toimitusehdot

Ilmainen standarditoimitus tilauksista yli $9.9

Palautusehdot

Tuotteiden palautukset hyväksytään 40 päivän kuluessa vastaanottopäivästä. Mukautettuja tuotteita ei voi palauttaa tai vaihtaa. Sähköisellä lahjakortilla ostetut tuotteet voidaan vain vaihtaa; hyvityksiä ei voida myöntää.

Ilmainen Lahja

Tervetuloa Roymalliin, ammattimaiselle verkkosivustollesi korkealaatuisten tavaratalolahjojen ostamiseen. Arvostamme ja kiitämme tukeasi ja haluamme ilmaista kiitollisuuttamme lisäämällä ostoksiisi ylimääräisen säpinän. Kun teet ostoksia kanssamme, et vain nauti korkealaatuisista tuotteista, jotka parantavat elämääsi, vaan saat myös eksklusiivisen ilmaisen lahjan jokaisesta tilauksestasi. Valmiina tutustumaan kokoelmaamme ja löytämään täydelliset lahjasi? Selaa valikoimaamme korkealaatuisia tavaratalotuotteita, tee tilauksesi ja odota iloa ilmaisesta lahjastasi, joka saapuu ostoksesi mukana.

Toimitusehdot

Teemme parhaamme toimittaaksemme tuotteesi turvallisesti tilauksesi vastaanottamisen jälkeen. Toimitustiedot toimitetaan vahvistussähköpostissasi.Useimmissa tapauksissa tilaukset käsitellään 2 päivän kuluessa. Poikkeuksellisissa olosuhteissa se voi viivästyä seuraavasti: Kun teet tilauksen lauantaina, sunnuntaina tai pyhäpäivinä, se viivästyy 2 päivää.Normaalisti kuluu 5-7 arkipäivää (maanantaista perjantaihin) ilman lennon viivästystä tai muita ympäristötekijöitä.Koska toimituspalvelumme on maailmanlaajuinen, toimitusajat riippuvat sijainnistasi, joten saattaa kestää jonkin aikaa ja odota kärsivällisesti, jos olet syrjäseuduilla tai maissa.

1. Palautus- & Vaihtoehdot

Hyväksymme vain tuotteet, jotka on ostettu roymall.com-sivustolta. Jos ostat paikallisilta jakelijaltamme tai muilta jälleenmyyjiltä, et voi palauttaa niitä meille. Loppuunmyydyt tuotteet tai ilmaiset lahjat eivät ole palautettavissa.Palautettavan tuotteen on oltava käyttämätön ja samassa kunnossa kuin sen vastaanottamishetkellä. Sen on myös oltava alkuperäisessä pakkauksessa.Kun olet saanut palautusohjeet meiltä, pakkaa palautettavat tuotteet ja jätä pakettisi paikalliseen postiin tai toiseen kuljetusliikkeeseen.
Käsittelemme palautuksen tai vaihdon tuotteen 3-5 arkipäivän kuluessa sen vastaanottamisesta. Hyvitys käsitellään ja hyvitetään automaattisesti alkuperäiseen maksutapaasi.Mukautettuja tuotteita, mukaan lukien mukautetut koot, värit tai painatukset, ei voida palauttaa tai vaihtaa.Tarvitsetko lisäapua, ota yhteyttä. service@roymall.com tai Whatsapp: +8619359849471

2. Hyvitysehdot

Saat täyden hyvityksen tai 100% kaupan luoton, kun olemme vastaanottaneet ja tarkastaneet palautetun paketin. Hyvitys käsitellään ja hyvitetään automaattisesti alkuperäiseen maksutapaasi.Huomaa, että toimituskulut ja mahdolliset tullit tai maksut eivät ole hyvitettävissä. Lisätoimituskulut eivät ole hyvitettävissä, kun paketti on lähetetty. Olet vastuussa näiden maksujen maksamisesta, emmekä voi vapauttaa tai hyvittää niitä, vaikka tilaus palautettaisiin meille.Kun olemme vastaanottaneet ja vahvistaneet palautetun tuotteen, lähetämme sinulle sähköpostin ilmoittaaksemme, että olemme vastaanottaneet palautetun tuotteen. Ilmoitamme myös hyvityksen hyväksynnästä tai hylkäyksestä.Jos sinulla on ongelmia hyvitysprosessin kanssa, ota yhteyttä. service@roymall.com tai Whatsapp: +8619359849471

Description:
Item Name:3CH LED Light Switch System
Material:plastic and electronic components
Color:black
Size:190mm length
Compatible with: RC Model Cars
It can be connected to a single or double set of lights

How To Use:
Put the piug of the servo on the remote control board into the third channel of the receiver,then you can control the light switch
You can also plug into a "receiver powered" light(means that the light can be directed inserted on the receiver),the board has a boost regulator.,can bring 12 numbers 5mm led lights

Package included:
1X 190mm 3CH LED Light Switch System

Osta Paypalilla

Products related to this item

Loading related products...

Eachine E186 RC Helicopter Spare Parts Battery

$22.99

Universal Remote Control Full Metal Handwheel Steering Wheel for FUTABA 4PX SANWA MT4 Flysky NB4 WFLY X9 Transmitter

$13.99

Eachine TS832 Boscam 5.8G 48CH 600mW 7.4-16V Wireless Transmitter W/ RC832 5.8G 48CH Wireless AV Receiver for RC Drone

$37.49

SG 1603 1604 UDIRC 1601 RC Car Spare 7.4V 1200mAh 2S 5C JST Plug Li-ion Battery 1603-012 Vehicles Parts

$5.34

Microzone E6R-E 2.4GHz 6CH Stabilizer Mini RC Receiver For MC6C E6 MC7 MC8B MC10 Radio Transmitter

$13.99

FLY WING 4 Blade Helicopter Metal Rotor Holder Set Upgrade 6mm Main shaft for FW450 Bell UH-1 RC Helicopter

$68.99

GOOSKY S1 6CH 3D Aerobatic Dual Brushless Direct Drive Motor RC Helicopter BNF with GTS Flight Control System/RTF

$199.00

BRDRC 4022F Lightweight Colorful Propeller Props Blades Accessories for DJI FLIP RC Drone Quadcopter

$12.99

Wltoys 12427 12428 12429 1/12 V2 RC 2.4G 2CH Spare Transmitter Remote Controller 1176 Vehicles Models Spare Parts

$24.99

XLF X03A X04A MAX X05 X06 X07 F19 F11A 1/10 RC Car Spare Wheelie Bar Head Wheel Assembly Vehicles Models Parts

$4.99

Ball Link Plier RC Helicopter Airplane Car Repair Tool Kit Tool

$14.99

Upgrades Strengthen Aluminum Suspension Link Set For Hoss Slash Rustler 4WD RC Car Parts

$6.99

Arkbird HD Digital Signal Convert to Analog Signal 5.8Ghz 32CH Module FPV Receiver for DJI Goggles V1 V2

$39.27

Wltoys 124018 1/12 RC Car Spare Tail Wing 1857 Vehicles Model Parts

$4.00

Eachine E160 RC Helicopter Spare Parts Main Shaft Set

$4.99

VolantexRC Ranger 2000 757-8 Phoenix V2 759-2 757-7 757-9 759-3 742-7 RC Airplane Spare Part Servo Horn and Screws 6 Sets

$4.00

SPT Servo SPT5425LV 25KG 90° Large Torque Digital Metal Gear Servo For 1:8 1:10 RC Robot Car Boat

$18.99

4 Pairs GEMFAN GF 1050 CCW Counterclockwise Electric Propeller For RC Airplane

$6.85

Racerstar Racing Edition 2205 BR2205 2300KV 2-4S Brushless Motor for 220 250 280 RC Drone FPV Racing

$9.29

ISDT UC2 1S/2S LiPo Battery Balance Smart USB Charger XH 2.54 Balance Port Direct Charge

$3.53

Volantex RC 768-1 Mustang P-51D 765-2 RC Airplane Spare Part 20A Brushless ESC

$12.99

Radiomaster Button Board and Potentiometer Assembly for Pocket Radio Transmitter

$0.95

YXZNRC F280 3D/6G 6CH RC Helicopter Parts 4-6S BEC 5V/8A 60A ESC

$59.99

Surpass Hobby 3650 Waterproof 4Pole￠3.175mm Unsensed Brushless RC Car Motor+60A ESC For 1/8/10 Vehicle Models

$39.99

4 Pairs Gemfan Hurricane 2520 2.5x2.0 2.5 Inch 3-Blade Propeller 1.5mm Hole for RC Drone FPV Racing

$3.29

Upgraded 1/8 RC Car Motor Seat Mount for KYOSHO MP10 HSP FS Racing R70 RC Cars Vehicles Models Spare Parts

$14.99

Upgraded Metal Rear Wheel Seat Steering Cup C Hub Set for Wltoys 124008 124010 144001 1/12 1/14 RC Cars Vehicles Models Spare Parts

$13.99

1/14 Metal Upgrade Steering Seat Rear Wheel Seat C Seat For Wltoys 144001 RC Car Parts

$7.19

Realacc RHCP Pogoda Antenna + TFP-Mini Triple Feed Patch 45mm Black 5.8G FPV Antenna For FPV RC Drone

$8.00

EMAX Tinyhawk Nanoscout Flight Controller and VTX for Analog 65mm 1S Whoop FPV Racing Drone

$63.99

H09 Mini Hoglet CNC Single Cylinder Engine Parts Spark Plug 3/16-40 Threads Science Discovery Toys Accessories

$11.99

5Pcs URUAV 3.7V 250mAh 30C/60C 1S Lipo Battery PH2.0 for Tiny Whoop TINY6 6X

$13.99

❮

❯

Videos for similar product

Loading product videos...

4 Pack Premium Rubber Door Stoppers Wedge, Door Stops for Carpet Heavy Duty Door, for Bottom of Door on Tile, Concrete, Carpet, Wooden Floor (Orange)

Turandoss Gold Initial Bracelets for Girls Women Jewelry Gifts - 18k Gold/Silver Plated Letter Initial Bracelet Dainty Gold Bracelets for Women Initial Bracelets for Teen Girls Gifts Trendy Stuff - (color: Gold, style: S)

Braided Watch Bands Compatible with Fitbit Inspire 3/Inspire 2/Inspire/Inspire HR/Fitbit ace 3/Ace 2, Soft Adjustable Nylon Loop Elastic Strap Sport Replacement Wristbands for Women Men - (color: Black+Wine Red+Off-White)

BYNIIUR Trim Removal Tool, Fastener Remover Tool Kit Automotive Interior Plastic Pry Kit, Car Door Panel Tool Radio Auto Clip Pliers Removal Tool Kit, Red

STICKIT Magnetic Golf Towel, Premium 29" Microfiber with Deep Waffle Pockets, Industrial Strength Magnet for Secure Hold to Golf Carts & Clubs, Ultra-Absorbent, Fast-Drying, Easy-Clean Design

Womens Long Sleeve Color Block Tunic Tops Dressy Casual Round Neck Pullover Loose Fit Blouses - (color: White-gray-blue, size: Medium)

Human Dog Bed, 71"x45"x12" Dog Beds for Humans Size Fits You and Pets, Washable Faux Fur Human Dog Bed for People Doze Off, Napping Orthopedic Dog Bed, Present Plump Pillow, Blanket, Strap - Grey

GPS Speedometer,Heads Up Display for Cars H2,Universal HUD Speedometer with USB Connection,Plug and Play,Displays MPH,Compass,Over Speed Alert,for All Vehicles

30X CF230X Black High Yield Toner Cartridge Compatible Replacement for HP 30X CF230X 30A CF230A M203dw for HP Laserjet Pro MFP M227fdw M227fdn M203dn M227sdn M203d M227 M203 Series Printer 2 Pack

Portable Charger 10000mAh Power Bank with Built-in Cable, 5 Output 2 Input Travel Essential External Battery Pack with LED Display Compatible with iPhone 16/15 Samsung S22 Android,etc

YOVION Girls Summer Puff Sleeve Swiss Dot Smocked A-Line Ruffle Tiered Formal Party Dress with Bowknot for 6-12 Y - (color: Black, size: 8 Years)

Cute little monkey plush doll

Best Printer Cleaning Kit for Epson, HP | Brother Inkjet Printhead Cleaning Kit | Inkjet Printer Head Cleaner | Printer Head Cleaning Kit with LARGE 20ml Syringe - 100ml Printer Cleaning Fluid

Chinese antique lacquerware small screen

Bird Feeder with Camera Solar Powered: Smart Hummingbird Feeder for Backyard - 2K Live AI Identify Auto Capture Bird Video Pictures - WiFi Bird Watching Feeders Gift for Bird Lovers Mom Dad

2025 Wall Calendar - Large 22"x17" Beach Calendar, Scenic Calendar Yearly Planner 12-Month from January to December 2025, Spiral Bound Wall Hanging Landscape Calendar for Home, Office and Dorm

DIY Photo Pillow Customization

Easy-Going Stretch Ottoman Cover Folding Storage Stool Furniture Protector Soft Rectangle slipcover with Elastic Bottom (Large, Coffee) - (size: Large, color: Coffee)

VUTRU Women's Casual Loose Overalls One Piece Sleeveless Jumpsuits Wide Leg Long Pant Rompers With Pockets

Find The Guest Bingo Bridal Shower Game - 50 Pcs Find The Guest Baby Shower Game for Rehearsal Dinner, Wedding Shower Games for Guests, Engagement Party Ideas Bridal Shower Decorations

Pickleball Paddles, USAPA Approved Pickleball Paddle Set of 4, Fiberglass Surface Pickleball Set, 4 Pickleball Balls, 4 Cooling Towels, Pickleball Bag, Pickle Ball Paddle for Men Women

EMSHOI Dotted Journal - 256 Pages Bullet Dotted Notebook, 120gsm Thick Paper Dot Grid Notebook, A5 Hardcover Leather Journal with Stencils, 16 Perforated Pages, Pen Loop, Inner Pocket, 5.75" x 8.38"

Ultra Push up Sticky Bra Pads Inserts | Double Sided Adhesive Bra Inserts | Stick on Bra for Sports Bra Swimsuit

3450 Watt Inverter Generator, 120V Gas Powered Generator Super Quiet, Parallel Capable for Home Emergency, RV and Camping - (style: 3450W Gas)

Koinshha Women V Neck Corduroy Overall Dress Casual Loose Short Pinafore Dresses Cute Mini Jumper Dress - (color: Dark Brown, size: XX-Large)

SleekGrip Premium: Swappable Phone Stand & Phone Grip - Ultra Thin Convertible Grip Holder Fits Most iPhone and Android Cases, Phone Strap Compatible with Wireless Chargers and Car Mounts

ANCHEER Under Desk Elliptical Machine - Quiet Pedal Exerciser for Seniors, Office & Home, Low-Impact Seated Leg Workout Equipment, Smart LCD Display, Remote Control

Hatsune Miku peripheral mug

20 LED Rechargeable Book Light for Reading in Bed, Eye Caring 3 Color Temperatures, Adjustable Brightness, 100H Runtime, Durable & Lightweight, Portable Clip On Reading Light for Study, Travel

Oqplog for Samsung Galaxy S23 Ultra 6.8” Heavy Duty Phone Case for Girls Kids Women Boys Cute Cartoon Hard Triple Layers Cover Full Body Rugged Military Grade Shockproof Cases for S23 Ultra Toy

MARJAKURKIWomen's wool scarf

YouTheFan NFL Logo Series Deskpad

❮

❯

Toys Hobbies & Robot Ranking

More Toys Hobbies & Robot

190mm 3CH LED Light Switch System W/ Flashing Light Function Turn ON / OFF for RC Car Model Parts

n
n

Customer Reviews

5.00 out of 5

See all 269 reviews

5 star

2 (100%)
4 star

0 (0%)
3 star

0 (0%)
2 star

0 (0%)
1 star

0 (0%)

Write a Review Get double review points if you are one of the first 3 reviews published!

All Reviews (269)
Image ( 2 )
Video (0)
All Star
- All Star(269)
- 5 Star (2)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)

Sort by:

Top Review

Top Review
Most Helpful
Most Recent

Reviews only from your country (United States)

Show Original

A part of the review has been auto-translated.

fpvfreaky VIP3
GB
22/08/2019

not bad, I found that it would work if I only take the lead off then plug it back in again it would work ok , I couldn’t just leave it in the receiver, it would need unplugging and plugging back in , not sure why that is. it got the truck done.

not bad, I found that it would work if I only take the lead off then plug it back in again it would work ok , I couldn’t just leave it in the receiver, it would need unplugging and plugging back in , not sure why that is. it got the truck done.

not bad, I found that it would work if I only take the lead off then plug it back in again it would work ok , I couldn’t just leave it in the receiver, it would need unplugging and plugging back in , not sure why that is. it got the truck done.
Rotate left Rotate right
2

Comments (0)

Show Original
ARC VIP3
US
30/08/2019

I am going to give this product five stars. you can tell that this on-off switches made with high-grade materials. You can also tell that it is well put together and should stand the test of time. I have installed it in my gmade Komodo and it works perfectly. Actually comes with five separate modes. Two separate sides of light systems can be applied. Side A and side B is what we will call them. The modes are as follows. Mode one. Side A side B both off. Mode 2 side A on side B off. mode 3 side A side B on. Mode 4 side A on and B on at the same time. mode 5 is demo mode and is a spectacular light show which includes side A and side B. that leads us to the one thing I think this product definitely could have used and that's some instructions. having to figure this one out on my own was not easy. however, I do not think that this takes away from any of its qualities that reflect this products five star rating. definitely worth every penny and then some..!!

I am going to give this product five stars. you can tell that this on-off switches made with high-grade materials. You can also tell that it is well put together and should stand the test of time. I have installed it in my gmade Komodo and it works perfectly. Actually comes with five separate modes. Two separate sides of light systems can be applied. Side A and side B is what we will call them. The modes are as follows. Mode one. Side A side B both off. Mode 2 side A on side B off. mode 3 side A side B on. Mode 4 side A on and B on at the same time. mode 5 is demo mode and is a spectacular light show which includes side A and side B. that leads us to the one thing I think this product definitely could have used and that's some instructions. having to figure this one out on my own was not easy. however, I do not think that this takes away from any of its qualities that reflect this products five star rating. definitely worth every penny and then some..!!

I am going to give this product five stars. you can tell that this on-off switches made with high-grade materials. You can also tell that it is well put together and should stand the test of time. I have installed it in my gmade Komodo and it works perfectly. Actually comes with five separate modes. Two separate sides of light systems can be applied. Side A and side B is what we will call them. The modes are as follows. Mode one. Side A side B both off. Mode 2 side A on side B off. mode 3 side A side B on. Mode 4 side A on and B on at the same time. mode 5 is demo mode and is a spectacular light show which includes side A and side B. that leads us to the one thing I think this product definitely could have used and that's some instructions. having to figure this one out on my own was not easy. however, I do not think that this takes away from any of its qualities that reflect this products five star rating. definitely worth every penny and then some..!!
Rotate left Rotate right
6

Comments (2)

Show Original

Show:

12...30

Total 0 pages

Go to page

Customer Q&As

Searching for relevant results...

Can't find your answer? Ask a new questionorCustomer Service

Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

showing 1-18 of 18 |

Show Original

A part of the QA has been auto-translated.

0

Q:
Is this a simple switch. Without some that offer flashing. I just want on-off,

Is this a simple switch. Without some that offer flashing. I just want on-off,
Is this a simple switch. Without some that offer flashing. I just want on-off,

A:

It is with flashing

It is with flashing

Answered by Stachelmaus on 10/09/2021Helpful (0)
0

Q:
Can somebody write a decent connection guide? In the description says plug the led board to Servo which is channel 1 not channel 3! I tested diffrent types of connections and the only way led board is working is plugging it to channel 1. First full left full right turns port1 on. Then port1 off port2 on, next 2 ports on and last flashing demo mode. Finally, all off. The problem is led board not works with my dumborc 3th channel at all. And if I plug it to Servo channel 1 then where should I plug steering Servo?

Can somebody write a decent connection guide? In the description says plug the led board to Servo which is channel 1 not channel 3! I tested diffrent types of connections and the only way led board is working is plugging it to channel 1. First full left full right turns port1 on. Then port1 off port2 on, next 2 ports on and last flashing demo mode. Finally, all off. The problem is led board not works with my dumborc 3th channel at all. And if I plug it to Servo channel 1 then where should I plug steering Servo?
Can somebody write a decent connection guide? In the description says plug the led board to Servo which is channel 1 not channel 3! I tested diffrent types of connections and the only way led board is working is plugging it to channel 1. First full left full right turns port1 on. Then port1 off port2 on, next 2 ports on and last flashing demo mode. Finally, all off. The problem is led board not works with my dumborc 3th channel at all. And if I plug it to Servo channel 1 then where should I plug steering Servo?

A:

The servo is connected with channel 1,esc with channel 2,ch3 switch line with channel 3

The servo is connected with channel 1,esc with channel 2,ch3 switch line with channel 3

Answered by Quaffheep1712 on 14/08/2020Helpful (0)
0

Q:
What is the output voltage of this device. As I am looking at different LED lights for my boat and they are either 3V or 6V. The battery I will be using is a LIPO 7V.

What is the output voltage of this device. As I am looking at different LED lights for my boat and they are either 3V or 6V. The battery I will be using is a LIPO 7V.
What is the output voltage of this device. As I am looking at different LED lights for my boat and they are either 3V or 6V. The battery I will be using is a LIPO 7V.

A:

InputV= Output V

InputV= Output V

Answered by RalfMasslau on 29/11/2023Helpful (0)
0

Q:
how do i use it for my rc car

how do i use it for my rc car
how do i use it for my rc car

A:

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

Answered by Runner on 12/02/2022Helpful (0)
0

Q:
how do I get side B functioning as side A does

how do I get side B functioning as side A does
how do I get side B functioning as side A does

A:

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

Answered by Runner on 12/02/2022Helpful (0)
0

Q:
Hello. I want to know how to install this light switch system? I have a WPL MN99 and MN99s RC. I will pair it with dumborc remote. I also got a new ESC. Please help. Rookie in RC world. Thank you in advance.

Hello. I want to know how to install this light switch system? I have a WPL MN99 and MN99s RC. I will pair it with dumborc remote. I also got a new ESC. Please help. Rookie in RC world. Thank you in advance.
Hello. I want to know how to install this light switch system? I have a WPL MN99 and MN99s RC. I will pair it with dumborc remote. I also got a new ESC. Please help. Rookie in RC world. Thank you in advance.

A:

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

Answered by Runner on 12/02/2022Helpful (0)
0

Q:
Will it work with all the Leds on the market

Will it work with all the Leds on the market
Will it work with all the Leds on the market

A:

the output voltage is again around 5v....you need to use LED wit resistor to work....only LED will die...depends of what color LED you using..check on google...different LED need different voltage....

the output voltage is again around 5v....you need to use LED wit resistor to work....only LED will die...depends of what color LED you using..check on google...different LED need different voltage....

Answered by Runner on 12/02/2022Helpful (0)
0

Q:
What is the output voltage?

What is the output voltage?
What is the output voltage?

A:

In my case I checked output voltage was around 5.1V

In my case I checked output voltage was around 5.1V

Answered by irarkh on 08/08/2020Helpful (0)
0

Q:
what is the output voltage ?

what is the output voltage ?
what is the output voltage ?

A:

3-3.2 Volts

3-3.2 Volts

Answered by irarkh on 22/08/2020Helpful (0)
0

Q:
How do I change "MODES"

How do I change "MODES"
How do I change "MODES"

A:

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

Answered by Runner on 12/02/2022Helpful (0)
0

Q:
The instructions are vague, technical specifications noexistent. If I can answer my own question I will provide some findings, however, before trying to identify tbe components to determine these values, what are the minimum and maximum voltage and current that can be switched? (Given ranges of some transmitter or BEC values they could be 3-8 VDC at a current of 50mA to 3A)

The instructions are vague, technical specifications noexistent. If I can answer my own question I will provide some findings, however, before trying to identify tbe components to determine these values, what are the minimum and maximum voltage and current that can be switched? (Given ranges of some transmitter or BEC values they could be 3-8 VDC at a current of 50mA to 3A)
The instructions are vague, technical specifications noexistent. If I can answer my own question I will provide some findings, however, before trying to identify tbe components to determine these values, what are the minimum and maximum voltage and current that can be switched? (Given ranges of some transmitter or BEC values they could be 3-8 VDC at a current of 50mA to 3A)

A:

not 100% sure of the max and min voltages, it does work with all of my surface rx's @5-6v 3rd channel is recommended. if you use channel 1, you'll need a splitter so this switch and your steering servo are both connected to the rx. once connected this way, full left turn followed by full right turn should activate, cycle throug modes, and deactivate this device.

not 100% sure of the max and min voltages, it does work with all of my surface rx's @5-6v 3rd channel is recommended. if you use channel 1, you'll need a splitter so this switch and your steering servo are both connected to the rx. once connected this way, full left turn followed by full right turn should activate, cycle throug modes, and deactivate this device.

Answered by mobilefrag on 31/10/2022Helpful (0)
0

Q:
will this work on AUSTAR LED Light Aluminum Alloy Frame For CC01/D90/SCX10/4WD RC Car Parts - Red Blue?

will this work on AUSTAR LED Light Aluminum Alloy Frame For CC01/D90/SCX10/4WD RC Car Parts - Red Blue?
will this work on AUSTAR LED Light Aluminum Alloy Frame For CC01/D90/SCX10/4WD RC Car Parts - Red Blue?

A:

Don6t know .

Don6t know .

Answered by RalfMasslau on 09/01/2021Helpful (0)
0

Q:
Can this device be used to switch from one camera sending its signal to the VTX to another? Please submit a circuit diagram for this an most basic configurations. The current instructions are confusing! Thanks. Jim

Can this device be used to switch from one camera sending its signal to the VTX to another? Please submit a circuit diagram for this an most basic configurations. The current instructions are confusing! Thanks. Jim
Can this device be used to switch from one camera sending its signal to the VTX to another? Please submit a circuit diagram for this an most basic configurations. The current instructions are confusing! Thanks. Jim

A:

No! not a camera switch.

No! not a camera switch.

Answered by mobilefrag on 14/12/2020Helpful (0)
0

Q:
Today I got 3 pieces of it. And it switches sometimes, sometimes not and it comes the what the reler gives out so good 6 volts. How is there to hold a LED, the Brent so immediately through. Total rubbish. I can take a servo electronics and convert it.

Habe heute 3 Stück davon bekommen. Und es schaltet mal, mal nicht und es kommt das was das Reler raus gibt also gut 6 Volt. Wie soll da eine LED halten, die Brent ja sofort durch. Totaler Müll. Da kann ich eine Servo Elektronik nehmen und umbauen.
Today I got 3 pieces of it. And it switches sometimes, sometimes not and it comes the what the reler gives out so good 6 volts. How is there to hold a LED, the Brent so immediately through. Total rubbish. I can take a servo electronics and convert it.

A:

This LED light switch system can work propelly,you can check if your plug or connection is correct

This LED light switch system can work propelly,you can check if your plug or connection is correct

Answered by Lee on 06/01/2021Helpful (0)
0

Q:
I have a 36 led light bar on my crawler, will this part support/power my light?

I have a 36 led light bar on my crawler, will this part support/power my light?
I have a 36 led light bar on my crawler, will this part support/power my light?

A:

i have 2 led bars with 16leds each and it works

i have 2 led bars with 16leds each and it works

Answered by BG564817573 on 27/07/2020Helpful (0)
0

Q:
hello can be plugged in a rvb led rubant on it for the pilot of the 3 lane

bonjour peut on y brancher un rubant de led rvb dessus pour le pilote de la 3 voie
hello can be plugged in a rvb led rubant on it for the pilot of the 3 lane

A:

No,it cannot

No,it cannot

Answered by Conciliabule on 06/03/2020Helpful (0)
0

Q:
Can it handle 12V power?

Can it handle 12V power?
Can it handle 12V power?

A:

what is the output voltage

what is the output voltage

Answered by Faraz on 05/04/2020Helpful (0)
0

Q:
no voltage coming out? I get voltage all the way to the board which is about 5.6 volts. Once I place the probes to the 4 different contacts, no voltage. I have purchased three of them and still none of them have any voltage coming out?

no voltage coming out? I get voltage all the way to the board which is about 5.6 volts. Once I place the probes to the 4 different contacts, no voltage. I have purchased three of them and still none of them have any voltage coming out?
no voltage coming out? I get voltage all the way to the board which is about 5.6 volts. Once I place the probes to the 4 different contacts, no voltage. I have purchased three of them and still none of them have any voltage coming out?

A:

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

You plug this switch to receiver to channel 3 , and then you control it with transmitter channel 3, the switch has 2 output, when you press 1x channel 3 on transmitter led 1 turns on, on second press Led 1+led 2 turns on, on third press led will flash, on forth pres light will go off.....ok??

Answered by Runner on 12/02/2022Helpful (0)