4-20MA Level Sensor Liquid Sensor Water Level Display Instrument / Beam Digital Display Control Instrument Level Transmitter for Water Level/Liquid Level/Oil Level
* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Tuotteiden palautukset hyväksytään 40 päivän kuluessa vastaanottopäivästä. Mukautettuja tuotteita ei voi palauttaa tai vaihtaa. Sähköisellä lahjakortilla ostetut tuotteet voidaan vain vaihtaa; hyvityksiä ei voida myöntää.
Ilmainen Lahja
Tervetuloa Roymalliin, ammattimaiselle verkkosivustollesi korkealaatuisten tavaratalolahjojen ostamiseen. Arvostamme ja kiitämme tukeasi ja haluamme ilmaista kiitollisuuttamme lisäämällä ostoksiisi ylimääräisen säpinän. Kun teet ostoksia kanssamme, et vain nauti korkealaatuisista tuotteista, jotka parantavat elämääsi, vaan saat myös eksklusiivisen ilmaisen lahjan jokaisesta tilauksestasi. Valmiina tutustumaan kokoelmaamme ja löytämään täydelliset lahjasi? Selaa valikoimaamme korkealaatuisia tavaratalotuotteita, tee tilauksesi ja odota iloa ilmaisesta lahjastasi, joka saapuu ostoksesi mukana.
Toimitusehdot
Teemme parhaamme toimittaaksemme tuotteesi turvallisesti tilauksesi vastaanottamisen jälkeen. Toimitustiedot toimitetaan vahvistussähköpostissasi.Useimmissa tapauksissa tilaukset käsitellään 2 päivän kuluessa. Poikkeuksellisissa olosuhteissa se voi viivästyä seuraavasti: Kun teet tilauksen lauantaina, sunnuntaina tai pyhäpäivinä, se viivästyy 2 päivää.Normaalisti kuluu 5-7 arkipäivää (maanantaista perjantaihin) ilman lennon viivästystä tai muita ympäristötekijöitä.Koska toimituspalvelumme on maailmanlaajuinen, toimitusajat riippuvat sijainnistasi, joten saattaa kestää jonkin aikaa ja odota kärsivällisesti, jos olet syrjäseuduilla tai maissa.
1. Palautus- & Vaihtoehdot
Hyväksymme vain tuotteet, jotka on ostettu roymall.com-sivustolta. Jos ostat paikallisilta jakelijaltamme tai muilta jälleenmyyjiltä, et voi palauttaa niitä meille.Loppuunmyydyt tuotteet tai ilmaiset lahjat eivät ole palautettavissa.Palautettavan tuotteen on oltava käyttämätön ja samassa kunnossa kuin sen vastaanottamishetkellä. Sen on myös oltava alkuperäisessä pakkauksessa.Kun olet saanut palautusohjeet meiltä, pakkaa palautettavat tuotteet ja jätä pakettisi paikalliseen postiin tai toiseen kuljetusliikkeeseen. Käsittelemme palautuksen tai vaihdon tuotteen 3-5 arkipäivän kuluessa sen vastaanottamisesta. Hyvitys käsitellään ja hyvitetään automaattisesti alkuperäiseen maksutapaasi.Mukautettuja tuotteita, mukaan lukien mukautetut koot, värit tai painatukset, ei voida palauttaa tai vaihtaa.Tarvitsetko lisäapua, ota yhteyttä. service@roymall.com tai Whatsapp: +8619359849471
2. Hyvitysehdot
Saat täyden hyvityksen tai 100% kaupan luoton, kun olemme vastaanottaneet ja tarkastaneet palautetun paketin. Hyvitys käsitellään ja hyvitetään automaattisesti alkuperäiseen maksutapaasi.Huomaa, että toimituskulut ja mahdolliset tullit tai maksut eivät ole hyvitettävissä. Lisätoimituskulut eivät ole hyvitettävissä, kun paketti on lähetetty. Olet vastuussa näiden maksujen maksamisesta, emmekä voi vapauttaa tai hyvittää niitä, vaikka tilaus palautettaisiin meille.Kun olemme vastaanottaneet ja vahvistaneet palautetun tuotteen, lähetämme sinulle sähköpostin ilmoittaaksemme, että olemme vastaanottaneet palautetun tuotteen. Ilmoitamme myös hyvityksen hyväksynnästä tai hylkäyksestä.Jos sinulla on ongelmia hyvitysprosessin kanssa, ota yhteyttä. service@roymall.com tai Whatsapp: +8619359849471
Filled with silicone oil, and the sensor chip is completely isolated from the medium, which can measure a variety of medium levels.
The medium can be a variety of liquids (for vacuum wire non-corrosive media, choose a material if it corrodes stainless steel or tetrafluoroethylene).
Low water level monitoring of open water tanks, depth or water level measurement of wells and open waters, groundwater level measurement, sewage treatment, water supply, and pharmaceutical industry, water system measurement and control of other industries.
Features:
Impact design
High accuracy and stability
Flexible installation and easy to use
Small size, light weight and shockproof
Low cost, impact design
Specification:
Measuring medium: water
Temperature: 0-50 Celsius
Sensitivity: 2.0MV / V
Overload pressure: 150% FS
Measuring range: 5m
Colour:Black, silver
Material:Plastic, metal
Size:Cable length: 6m
Package Contents:
1* Sensor(Can be used for water level/liquid level/oil level)
1* Display
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
yes: the sensor (metal cylinder) and its cable are meant to be in the water. the electronic box and display must not be submerged.
my system is installed since several months and is still in perfect working condition
yes: the sensor (metal cylinder) and its cable are meant to be in the water. the electronic box and display must not be submerged.
my system is installed since several months and is still in perfect working condition
Answered by Christophe_76 on 22/09/2021Helpful (0)
0
Q:
My water tank is on 6th floor (for Sensor) and I need to set display unit at ground floor is it possible?
My water tank is on 6th floor (for Sensor) and I need to set display unit at ground floor is it possible?
In the English manual, it states 500m "Measuring range: 0- 500 meters" that is 50Bar, but on this Banggood webpage it states 5m 0.5Bar (in my translation). Which information is correct?
In the English manual, it states 500m "Measuring range: 0- 500 meters" that is 50Bar, but on this Banggood webpage it states 5m 0.5Bar (in my translation). Which information is correct?
How to configure T80 to show value 0,00 to 5,00 (meters) or 0 to 500 cm (this part is clear) and in the same time bar graph to show percentage of full (this part is missing cause bar graph is showing nothing)? K2 parameter (bar graph conditioning) is not available on T80 you sent me.
How to configure T80 to show value 0,00 to 5,00 (meters) or 0 to 500 cm (this part is clear) and in the same time bar graph to show percentage of full (this part is missing cause bar graph is showing nothing)? K2 parameter (bar graph conditioning) is not available on T80 you sent me.
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
Answered by The seller on 08/11/2022Helpful (0)
0
Q:
I see that 230v ac is stated as the supply voltage. This seems strage for such an instrument.<br/>Does it also have the ability to use 12v DC as the supply voltage?<br/>Can you send me the english manual?<br/><br/>Thank you
I see that 230v ac is stated as the supply voltage. This seems strage for such an instrument.<br/>Does it also have the ability to use 12v DC as the supply voltage?<br/>Can you send me the english manual?<br/><br/>Thank you
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
Answered by The seller on 02/11/2022Helpful (0)
0
Q:
Does this transducer controller have RS/485 output? Any output available (voltage or 4/20mA) that I can use to feed an external analog based controller?
Does this transducer controller have RS/485 output? Any output available (voltage or 4/20mA) that I can use to feed an external analog based controller?
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
Answered by The seller on 25/08/2022Helpful (0)
0
Q:
How to connect the sensor to the device, which color of the wires of sensor (red and black) to which pin number on the device (1 to 22). The device should show full scale 0,00-5,00m - if not which parameter should be set?
How to connect the sensor to the device, which color of the wires of sensor (red and black) to which pin number on the device (1 to 22). The device should show full scale 0,00-5,00m - if not which parameter should be set?