* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Tuotteiden palautukset hyväksytään 40 päivän kuluessa vastaanottopäivästä. Mukautettuja tuotteita ei voi palauttaa tai vaihtaa. Sähköisellä lahjakortilla ostetut tuotteet voidaan vain vaihtaa; hyvityksiä ei voida myöntää.
Ilmainen Lahja
Tervetuloa Roymalliin, ammattimaiselle verkkosivustollesi korkealaatuisten tavaratalolahjojen ostamiseen. Arvostamme ja kiitämme tukeasi ja haluamme ilmaista kiitollisuuttamme lisäämällä ostoksiisi ylimääräisen säpinän. Kun teet ostoksia kanssamme, et vain nauti korkealaatuisista tuotteista, jotka parantavat elämääsi, vaan saat myös eksklusiivisen ilmaisen lahjan jokaisesta tilauksestasi. Valmiina tutustumaan kokoelmaamme ja löytämään täydelliset lahjasi? Selaa valikoimaamme korkealaatuisia tavaratalotuotteita, tee tilauksesi ja odota iloa ilmaisesta lahjastasi, joka saapuu ostoksesi mukana.
Toimitusehdot
Teemme parhaamme toimittaaksemme tuotteesi turvallisesti tilauksesi vastaanottamisen jälkeen. Toimitustiedot toimitetaan vahvistussähköpostissasi.Useimmissa tapauksissa tilaukset käsitellään 2 päivän kuluessa. Poikkeuksellisissa olosuhteissa se voi viivästyä seuraavasti: Kun teet tilauksen lauantaina, sunnuntaina tai pyhäpäivinä, se viivästyy 2 päivää.Normaalisti kuluu 5-7 arkipäivää (maanantaista perjantaihin) ilman lennon viivästystä tai muita ympäristötekijöitä.Koska toimituspalvelumme on maailmanlaajuinen, toimitusajat riippuvat sijainnistasi, joten saattaa kestää jonkin aikaa ja odota kärsivällisesti, jos olet syrjäseuduilla tai maissa.
1. Palautus- & Vaihtoehdot
Hyväksymme vain tuotteet, jotka on ostettu roymall.com-sivustolta. Jos ostat paikallisilta jakelijaltamme tai muilta jälleenmyyjiltä, et voi palauttaa niitä meille.Loppuunmyydyt tuotteet tai ilmaiset lahjat eivät ole palautettavissa.Palautettavan tuotteen on oltava käyttämätön ja samassa kunnossa kuin sen vastaanottamishetkellä. Sen on myös oltava alkuperäisessä pakkauksessa.Kun olet saanut palautusohjeet meiltä, pakkaa palautettavat tuotteet ja jätä pakettisi paikalliseen postiin tai toiseen kuljetusliikkeeseen. Käsittelemme palautuksen tai vaihdon tuotteen 3-5 arkipäivän kuluessa sen vastaanottamisesta. Hyvitys käsitellään ja hyvitetään automaattisesti alkuperäiseen maksutapaasi.Mukautettuja tuotteita, mukaan lukien mukautetut koot, värit tai painatukset, ei voida palauttaa tai vaihtaa.Tarvitsetko lisäapua, ota yhteyttä. service@roymall.com tai Whatsapp: +447549870296
2. Hyvitysehdot
Saat täyden hyvityksen tai 100% kaupan luoton, kun olemme vastaanottaneet ja tarkastaneet palautetun paketin. Hyvitys käsitellään ja hyvitetään automaattisesti alkuperäiseen maksutapaasi.Huomaa, että toimituskulut ja mahdolliset tullit tai maksut eivät ole hyvitettävissä. Lisätoimituskulut eivät ole hyvitettävissä, kun paketti on lähetetty. Olet vastuussa näiden maksujen maksamisesta, emmekä voi vapauttaa tai hyvittää niitä, vaikka tilaus palautettaisiin meille.Kun olemme vastaanottaneet ja vahvistaneet palautetun tuotteen, lähetämme sinulle sähköpostin ilmoittaaksemme, että olemme vastaanottaneet palautetun tuotteen. Ilmoitamme myös hyvityksen hyväksynnästä tai hylkäyksestä.Jos sinulla on ongelmia hyvitysprosessin kanssa, ota yhteyttä. service@roymall.com tai Whatsapp: +447549870296
Description: Red Arrow Reversible 3.5 Inch Wood Turning Chuck 1-Inch x 8TPI Thread Wood Lathe Chuck Accessory Jaws Wood Lathe Turning Tool
Specification: RED ARROW 3.5 Inch Wood Turning Chuck Material: Precision machined 1045 high tensile steel Chuck Diameter: 3.5 Inch Connect Thread: 1" x 8TPI thread 1. The RED ARROW wood turning chuck system can sovle all your wood turning problems, provide a variety of solve. 2. The reversible wood turning chuck is a four jaw, self-centering, geared chuck exclusively designed for the wood turning lathe. 3. It comes with a Reverse Lock feature that enables the chuck to be locked securely onto the lathe spindle when using the forward and reverse functions on the lathe. 4. It has a dedicated 1" x 8TPI thread and is able to be used with any lathe that fits those specifications. 5. This chuck comes standard with the unique RED ARROW features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle, and 2" Jaws as standard. 6. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance. 7. Provide a variety of matching chuck accessory jaws, solve all your clamping problems.
Features: The four jaw design firmly grips both round and square wood. Special woodturning dovetail profile on jaws. Safe Lock Woodworm screw included for fast mounting of rough timbers. Auto safety stop feature-jaw slides can"t protrude past the chuck body. Jaw slides made from high-tech copper fused steel for maximum hardness, wear, and self-lubricating properties. Up to 400mm/16" diameter swing capacity.
RED ARROW Chuck Accessory Jaw
Item
Type
Clamping
Back strut
Fit All RED ARROW Chucks
Min.(mm)
Max.(mm)
Min.(mm)
Max.(mm)
#1
3.5 Inch Chuck 1 Inch x8TPI
/
#2
6028 Short pin jaw
8
29
25
46
#3
6024 Step jaw
9
31
27(37)
49(59)
#4
10028 Heightening jaw
42
64
52
74
#5
10038 gap jaw
58
77
70
89
#6
62317 Pizza jaw
78
100
96
118
#7
6016 Proboscis jaw
44
61
54
71
#8
10031 Increase pizza jaw
107
126
127
146
#9
3.5 Inch Chuck M33x3.5
Package Included: 1 x 3.5 Inch Lathe Chuck(come with woodworm screw, comfortable T bar handle, and 2" jaws as standard) or 1 x Jaw
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 56|
Show Original
A part of the QA has been auto-translated.
0
Q:
do you have chuck to suit a parkside lathe PDM 600 B2
do you have chuck to suit a parkside lathe PDM 600 B2
Não é o conjunto completo. quando você clica em comprar, mostra que é apenas a peça de número 7. Como sempre, uma pegadinha....
It's not the whole set. When you click on buy, it shows that it's just the number 7 piece. As always, a pick-me-up....
Answered by BG193311488 on 25/04/2022Helpful (0)
0
Q:
Hello! Please, what is the distance between the two fixing screw holes for each of the four jaws? I have a chuck here with me, so I want to see if your jaws would fit him. I await an answer! Grateful! Rafael
Hello! Please, what is the distance between the two fixing screw holes for each of the four jaws? I have a chuck here with me, so I want to see if your jaws would fit him. I await an answer! Grateful! Rafael
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
Answered by The seller on 14/06/2023Helpful (0)
0
Q:
are these made by Teknatool (Nova)? Some of the components in the images have their name on them and that image on the lathe is an old marketing image of theirs.
are these made by Teknatool (Nova)? Some of the components in the images have their name on them and that image on the lathe is an old marketing image of theirs.
Hello I need a chuck that clamps to CZK 547.*****%OFF | 3.5 Inch Reversible Wood Turning Chuck 1-Inch x 8TPI Thread Wood Lathe Chuck Accessory Jaws Wood Lathe Turning Tool M18 goes also this
dobrý den potřebuji sklíčidlo které se upíná na CZK 547.*****%OFF | 3.5 Inch Reversible Wood Turning Chuck 1-Inch x 8TPI Thread Wood Lathe Chuck Accessory Jaws Wood Lathe Turning Tool M18 jde i toto
Hi. It will select only the jaws (#2 - #8). Chucks are the #1 (with 1 inch 8tpi thread) and the #9 (with M*****,5 thread). Be careful which chuck will you select. The first one may have run out and is being uploaded.
Hi. It will select only the jaws (#2 - #8). Chucks are the #1 (with 1 inch 8tpi thread) and the #9 (with M*****,5 thread). Be careful which chuck will you select. The first one may have run out and is being uploaded.
You can contact banggood at cservice@banggood.com directly
You can contact banggood at cservice@banggood.com directly
Answered by Siderization on 06/07/2020Helpful (0)
0
Q:
I would like to know if this plaque is the way it shows or is not complete.Poque the price here for us from Brazil shows and of 147.40 in our currency if it is complete by that price I will ask for a
gostaria de saber se essa placa e do jeito que mostra ou nao e completa.poeque o preco aqui pra nos do brasil mostra e de 147.40 reais na nossa moeda se for completa por esse preco vou pedir uma
The size of the internal thread of my lathe is M33x3,5, in your ad the size of the chuck thread is 1 "x 8TPI, what's the difference, can I use it in my lathe?
The size of the internal thread of my lathe is M33x3,5, in your ad the size of the chuck thread is 1 "x 8TPI, what's the difference, can I use it in my lathe?